Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Manuel d'utilisateur télécharger pdf (Page 94)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

PN 613-50507-00 Rev C Page 94 of 224

Note - The current firmware version does not allow the Initial MRU parameter to be

configured. Attempting to configure this parameter will not result in an error but the new

value will not be applied.

Note - The current firmware version does not allow the following parameters to be

configured:

o Receive ACC Map

o Transmit ACC Map

o Magic Number

o FCS Size

Attempting to configure these parameters will result in the error message: "The error

occurred with 'Set' operation. Error: bad value."

PPP Link Quality Report

LQR Info

Displays Link Quality Report information for a particular PPP link.

Note - The LQR Info sub-menu option does not display the correct parameters.

Instead, it displays the sub-menu option name as a parameter with a value of

'noSuchName'.

LQR Configuration

Displays Link Quality Report configuration information for a particular PPP link.

Note - The LQR Configuration sub-menu option does not display the correct

parameters. Instead, it displays the sub-menu option name as a parameter with a value

of 'noSuchName'.

LQR Extensions

Displays information on the most recently received Link Quality Report packet for a

particular PPP link.

Note - The LQR Extensions sub-menu option does not display the correct parameters.

Instead, it displays the sub-menu option name as a parameter with a value of

'noSuchName'.

PPP Tests

Performs a PPP echo test or PPP discard test.

Note - The PPP Tests sub-menu option does not display the correct parameters. Instead, it

displays the sub-menu option name as a parameter with a value of 'noSuchName'.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 223 224

Pas de commentaire

Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Manuel d'utilisateur Page 94