Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Manuel d'utilisateur télécharger pdf (Page 65)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

PN 613-50507-00 Rev C Page 65 of 224

System Info

Displays basic system information, including system name, location, contact and description.

Network Info

Displays network-related information such as the addresses of the default gateway and the

agents.

Note - The current firmware version does not allow the DNS Server and Default Domain

Name parameters to be configured. Attempting to configure these parameters will result in

the error message: "The error occurred with 'Set' operation. Error: gen Error.".

Chassis Info

Displays chassis information including the firmware information.

Note -The current firmware version does not allow the Power A Status and Power B Status

parameters to be configured. Attempting to configure these parameters will result in the error

message: "The error occurred with 'Set' operation. Error: gen Error.".

Line Card Info

Displays information for each line card including line card type and line card temperature.

MAC Address Table

Displays a list of static MAC address configured on the switch.

Note - Valid MIB Set values for the MAC Address Entry Status parameter are 'active', 'not in

service' and 'destroy'. Attempting to set this parameter to any other value will result in error

message: "The error occurred with 'Set' operation. Error: bad value".

Reset

Resets the switch.

Telnet

Starts a Telnet connection to the switch.

WEB Browser

Connects to the switch's HTTP server.

Bridge Menu

From the Bridge menu, you can view and edit bridge information such as the forwarding database

and the spanning tree status.

Forwarding Database

Displays the Forwarding Database table.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 223 224

Pas de commentaire

Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Manuel d'utilisateur Page 65