Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Manuel d'utilisateur télécharger pdf (Page 208)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

PN 613-50507-00 Rev C Page 208 of 224

AT-PB200 Series Switch Modules

PB201 PB202 PB202/1 PB202/3 PB202/4

LED State Description

DUP

Green

Gray

The media converter is operating in full-duplex mode.

The media converter is operating in half-duplex mode.

AN Green The 10/100Base-TX port is auto-negotiating.

Note - Connection cannot be established between a 10/100Base-TX port on an AT-PB200 series

module that is configured to auto-negotiate and a 10/100Base-TX port on another AT-PB200 series

module that is configured to operate at 100 full/half duplex.

Note -The current firmware version allows the Port A Speed parameter to be set to '10M' even if Port

A is only capable of operating at a speed of 100Mbps.

Note -The current firmware version allows the Port A Mode parameter to be set to 'auto' even if Port

A is not capable of auto-negotiation.

Note -When the Port B Mode parameter is set to 'auto', the current firmware version is unable to

provide information on the negotiated speed and mode for Port B. As a result, the speed reflected on

the port image may be a '10' when it should really be '100' and vice-versa. Also, expect the DUP

LED to be gray when it should really be green or orange.

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 223 224

Pas de commentaire

Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Manuel d'utilisateur Page 208