Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Manuel d'utilisateur télécharger pdf (Page 158)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

PN 613-50507-00 Rev C Page 158 of 224

on, use the command SHOW SYSTEM. To turn on RPS monitoring using SNMP, set the

fanAndPsRpsMonitoringStatus variable to on.

Agent Menu

From the Agent menu, you can view and edit the system information for the switch, or log into the

CLI using Telnet.

System Info

Displays basic system information, including system name, location, contact and description.

Power Supply Info

Displays information about the power supply, redundant power supply and power supply

monitoring.

File List

Displays a list of the files in the switch's file system.

Config File Name

Displays the file name of the start-up configuration file.

Telnet

Connects to the switch's Telnet server.

WEB browser

Opens your web browser and connects to the switch's HTTP server.

Note - The web browser can only contact the device if the device has a valid resource file

loaded and set, and the HTTP server and GUI on the device are enabled.

Routing Menu

From the Routing menu, you can view and edit information about the switch's IP routing functions.

ARP Table

Displays the ARP cache on the switch.

Address Table

Displays the list of IP interfaces on the switch.

Route Table

Displays the IP routing table on the switch.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 223 224

Pas de commentaire

Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Manuel d'utilisateur Page 158