Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Manuel d'utilisateur télécharger pdf (Page 189)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

PN 613-50507-00 Rev C Page 189 of 224

Telnet

Starts a Telnet connection to the switch.

WEB browser

Opens your web browser and connects to the switch's HTTP server.

Note - The web browser can only contact the device if the device has a valid resource file

loaded and set, and the HTTP server and GUI on the device are enabled.

Reset Cold

Resets the hardware and executes the default configuration file.

Reset Warm

Performs a warm start of the software modules and executes the default configuration file.

Routing Menu

From the Routing menu, you can view and edit information about the switch's IP routing functions.

ARP Table

Displays the mapping of IP addresses to MAC addresses (the ARP cache), on the switch.

Address Table

Displays the list of IP interfaces and their IP addresses on the switch.

Route Table

Displays the IP routing table on the switch.

IP Statistics

Displays statistics about IP routing, including the number of IP datagrams received.

ICMP Statistics

Displays statistics about ICMP, including the number of ICMP datagrams received.

Bridge Menu

From the Bridge menu, you can view and edit bridge information such as the forwarding database

and the spanning tree status.

Forwarding Database

Displays the Forwarding Database table.

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 223 224

Pas de commentaire

Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Manuel d'utilisateur Page 189