Allied-telesis SwitchBlade x8106 Manuel d'utilisateur télécharger pdf (Page 201)

SwitchBlade x8106 Chassis Switch Installation Guide

201

AT-SBxFAN06 Fan Module

The AT-SBxFAN06 Fan Module is operating correctly when the POWER

LED on the module is solid green. If the LED on the fan module is off,

check the FAN LED in the SYS STATUS section on the active master

controller card. The LED should be green. If the FAN LED is off or flashing

amber, one or more fans in the module are no longer operating properly.

You may also view the status of the unit with the SHOW FANMODULE

command in the management software.

You may notice changes in the fan speeds. This is normal. The active

master controller card automatically adjusts the fan speeds according to

the internal temperature of the chassis.

Note

The AT-SBxFAN06 Fan Module is hot swappable. You do not have

to power off the AT-SBx8106 Chassis to replace the module.

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 239 240

Pas de commentaire

Allied-telesis SwitchBlade x8106 Manuel d'utilisateur Page 201