Allied-telesis SwitchBlade x8106 Manuel d'utilisateur télécharger pdf (Page 132)

Chapter 6: Installing the Transceivers and Cabling the Ports

132

Figure 85. Removing the Dust Cover from the SFP Transceiver in the AT-

SBx81GS24a Line Card

Note

The dust cover protects the fiber optic port on the SFP transceiver

from dust contamination. It should not be removed until you are

ready to connect the fiber optic cable.

6. Before connecting the cable, verify the position of the handle on the

SFP transceiver. The handle should be in the up position if the

transceiver is in the top row on the line card, as shown in Figure 86, or

the down position if the transceiver is in the bottom row.

Figure 86. Verifying the Position of the Handle on the SFP Transceiver on

the AT-SBx81GS24a Line Card

Handle

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 239 240

Pas de commentaire

Allied-telesis SwitchBlade x8106 Manuel d'utilisateur Page 132