Allied-telesis AT-S95 CLI Manuel d'utilisateur télécharger pdf (Page 83)

100

101

Configuration and Image File Commands

Page 71

show bootvar

The show bootvar Privileged EXEC mode command displays the active system image file that is loaded by the

device at startup.

Syntax

show bootvar [unit unit]

Parameters

•

unit — Specifies the unit number.

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example displays the active system image file that is loaded by the device at startup.

interface ethernet 1/g1

ip address 176.242.100.100 255.255.255.0

duplex full

speed 1000

interface ethernet 1/g2

ip address 176.243.100.100 255.255.255.0

duplex full

speed 1000

Console#

show bootvar

Images currently available on the FLASH

image-1 active

image-2 not active (selected for next boot)

Unit Active Image Selected for next boot

---- ------------ ----------------------

1 image-1 image-2

2 image-1 image-1

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 347 348

Commentaires sur ces manuels

Pas de commentaire

Allied-telesis AT-S95 CLI Manuel d'utilisateur Page 83

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Allied-telesis AT-S95 CLI