Allied-telesis Removable Power Supply and Fan Manuel d'utilisateur

Installation GuideRemovable Power Supply and FanAT-PWR01AT-PWR02AT-PWR05AT-FAN01AT-FAN03

Installation Guide9Connecting an AC power supplyFollow these instructions to connect an AT-PWR01, AT-PWR02, or AT-PWR05 AC PSU to an AC power supply:W

Removable Power Supply and Fan103. Connect the power cord to the main power source.4. Set the Run/Standby switch to Run.5. The PSU LED on the front pa

Installation Guide11Connecting a DC power supplyFollow these instructions to connect an AT-PWR01-80 DC PSU to a DC power supply. Only trained and qual

Removable Power Supply and Fan125. Ensure there are no exposed cable strands.6. Replace the cover. You must replace the transparent plastic terminal c

Installation Guide13Checking LEDsLEDs on PSUs, fans, and the front panels of switches indicate the operational status of the devices. After you have i

Removable Power Supply and Fan14Switch The following table describes how LEDs on the switch report operations and faults with installed PSUs and FOMs.

Installation Guide15TroubleshootingIf the PSU does not function as expected: check that all cable connections are correct and secure. check that the

Removable Power Supply and Fan16Obtaining Documentation and ResourcesThe complete document set for x900 Series switches and SwitchBlade x908 includes:

Installation Guide17Other resourcesHow-To Notes describe a range of standard Allied Telesis solutions, and include technical tips and guides to config

Removable Power Supply and Fan18StandardsProducts in this document meet the following standards:Category Approval Agency and RequirementUL60950-1CAN/C

Removable Power Supply and FanInstallation GuideAT-PWR01AT-PWR02AT-PWR05AT-FAN01AT-FAN03Download the complete document set fromwww.alliedtelesis.com/s

Installation Guide19EC Declaration of ConformityWe: ALLIED TELESIS LABS LIMITED27 NAZARETH AVENUECHRISTCHURCH 8024NEW ZEALANDDeclare under our sole le

Removable Power Supply and Fan2Removable Power Supply and Fan Installation GuideDocument Number C613-04057-00 REV K© 2008 Allied Telesis, Inc. All rig

Installation Guide3ContentsAbout this Guide ...

Removable Power Supply and Fan4About this GuideThis Installation Guide describes how to install the following PSUs and fans: AT-PWR01 PSU, either AC

Installation Guide5Package ContentsDepending on the model, switches are shipped with a single supply unit (PSU), either AC or DC. Some models also hav

Removable Power Supply and Fan6Installing a Power Supply Unit or FanUse these instructions to install PSUs, chassis fans and FOMs. Do not combine PWR

Installation Guide7Installing a PWR01, PWR02, or FAN011. If you are replacing a PSU, disconnect the power cord from the current one before removing it

Removable Power Supply and Fan8Installing a PWR05 or FAN031. If you are replacing a PSU, turn off the main power source to the PSU and disconnect the