Allied-telesis Network Service Module Manuel d'utilisateur

Network Service ModuleInstallation and Safety GuideAT-AR040AT-AR041AT-AR042AT-AR048

Installation and Safety Guide 9613-000610 Rev B6. Slide the NSM into place.Slide the NSM into the NSM bay, making sure the ends of the captive screws

10 Network Service Module613-000610 Rev B LEDs and What They MeanThe following LEDs report operations and faults on NSMs: “AT-AR041 and AT-AR042 LEDs

Installation and Safety Guide 11613-000610 Rev BAT-AR048 LEDsThe following table describes LEDs on the AT-AR048 NSM. Switch and Router LEDsThe followi

Obtaining Documentation and ResourcesFor more information, see: the Installation and Safety Guide for your switch or router the Network Service Modu

Network Service ModuleInstallation and Safety GuideAT-AR040AT-AR041AT-AR042AT-AR048Download the complete document set fromwww.alliedtelesis.com/suppor

2 Network Service Module613-000610 Rev B Network Service Module Installation and Safety GuideDocument Number 613-000610 Rev B.© 2007 Allied Telesis, I

Installation and Safety Guide 3613-000610 Rev BContentsAbout this Guide ...

4 Network Service Module613-000610 Rev BAbout this GuideThis Installation and Safety Guide describes how to install the following Network Service Modu

Installation and Safety Guide 5613-000610 Rev BAT-AR048 SupportMaximum DS3 packet forwarding rates are achieved only when the AT-AR048 is installed in

6 Network Service Module613-000610 Rev B Hot SwappingThere are two methods for installing and removing NSMs: the standard installation method and the

Installation and Safety Guide 7613-000610 Rev BInstalling a Network Service ModuleWarning Failure to follow this procedure when hot swapping an NSM wi

8 Network Service Module613-000610 Rev B If an NSM is already installed, disconnect all network cables and TNV lines before removing the NSM from the