Allied-telesis AT-IX5-28GPX Manuel d'utilisateur télécharger pdf (Page 115)

IX5-28GPX Installation Guide

115

6. Verify the position of the handle on the SFP transceiver. If the

transceiver is in a top slot, the handle should be in the upright position,

as shown in Figure 67 on page 115. If the transceiver is in a bottom

slot, the handle should be in the down position.

Figure 67. Positioning the SFP or SFP+ Handle in the Upright Position

7. Connect the fiber optic cable to the transceiver, as shown in Figure 68.

The connector on the cable should fit snugly into the port, and the tab

should lock the connector into place.

Figure 68. Connecting a Fiber Optic Cable to an SFP or SFP+ Transceiver

8. Repeat this procedure to install additional transceivers.

S2/28

CON

SFP+

2678

SFP Handle

S2/28

CON

SFP+

2679

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 128 129

Pas de commentaire

Allied-telesis AT-IX5-28GPX Manuel d'utilisateur Page 115