Allied-telesis AT-FS717FC/xx Manuel d'utilisateur télécharger pdf (Page 19)

AT-FS713FC/xx and AT-FS717FC/xx Series Installation Guide

Ethernet Hub Workgroup Topology

Figure 4 illustrates an Ethernet hub workgroup topology where an

AT-FS713FC/SC is used to connect together four 10/100 Mbps Ethernet hubs.

This allows the switch to function as a bridge between the different

workgroups by controlling the flow of data between the workgroups. The

switch transfers an Ethernet frame from hub-to-hub only when the

destination end-node for the frame is on a different hub than the end-node

that originated the frame. This reduces the amount of unnecessary data traffic

in each workgroup. This frees up bandwidth and improves network

performance.

Figure 4 Ethernet Hub Workgroup Topology

1357911

TX RX

24681012 13

120-240V 50-60Hz 0.5A

AT-FS713FC/SC

Ethernet Hub

Ethernet Hub Ethernet Hub

100 Mbps

10 Mbps

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 45 46

Pas de commentaire

Allied-telesis AT-FS717FC/xx Manuel d'utilisateur Page 19