Allied-telesis FastSwitch8 Manuel d'utilisateur

FastSwitch810/100 Fast Ethernet Unmanaged SwitchInstallation GuidePN 613-10784-00 Rev. B

Product Description4Table 1 lists the dip switch settings.Table 1 Dip Switch SettingsLED IndicatorsThe LED indicators are used to monitor and trouble

5Chapter 2InstallationBefore you ProceedBefore installing the LanEdge FastSwitch8, make sure you read “FCC Compliance Statement” on page iii.Use this

Installation6Selecting a Site for the SwitchBe sure to observe the following requirements when choosing a site for your Ethernet switch:❑Place the swi

FastSwtich8 Installation Guide7To Place a Single LanEdge Product on a Desktop 1. Place the unit upside down.2. Locate the round rubber feet and square

Installation8Figure 4 Interlock CapTo Interlock a Group of LanEdge Products on a DesktopThe interlocking feature of the LanEdge products makes it eas

FastSwtich8 Installation Guide93. Place the first LanEdge unit on the desktop as the base. If you are installing a FastPrintServer, place it as the ba

11Appendix ATechnical SpecificationsPhysical CharacteristicsDimensions: 256 mm x 152 mm x 50 mmOperating temperatures: 0° to 55° CStorage temperatures

Technical Specifications12Recommended Cables and Cable SpecificationsThere are various grades of voice-quality and data-quality cables available. Thes

FastSwitch8 Installation Guide13Port PinoutsStraight-through CableCrossover Cable1234567812345678TD +TD -RD +Not UsedTD +TD -RD +Not UsedNot UsedNot U

Copyright 1999 Allied Telesyn International, Corp.960 Stewart Road Suite B, Sunnyvale CA 94086 USAAll rights reserved. No part of this publication ma

15Appendix BTechnical Support Fax OrderName_________________________________________________________________________Company___________________________

17Appendix CFastSwitch8 Installation Guide FeedbackPlease tell us what additional information you would like to see discussed in this guide. If there

19Appendix DWhere To Find UsFor Technical Support or ServiceLocation Phone FaxAmericasUnited States, Canada, Mexico, Central America, South America1 (

iiiFCC Compliance StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:1. The device may

vTable of ContentsFCC Compliance Statement ...iiiChapter 1Product Description...

1 Chapter 1Product DescriptionThe LanEdge FastSwitch8 is an eight-port switch that integrates 100 Mbps Fast Ethernet and 10 Mbps Ethernet network capa

Product Description2Key FeaturesThe FastSwitch8 provides the following features:❑IEEE 802.3 and 802.3u compliant.❑Store-and-forward at full wire speed

FastSwitch8 Installation Guide3Physical DescriptionFront PanelThe LanEdge FastSwitch8 front panel consists of Power and Port LED indicators, as shown