Allied-telesis AT-FS724 Manuel d'utilisateur télécharger pdf (Page 30)

,QVWDOODWLRQ

2-10

&RQQHFWLQJ#'HYLFHV#WR#WKH#6ZLWFK

The switch supports connectivity with DTEs such as workstations and

servers, and also DCEs such as hubs, routers, and other switches. The

switch supports devices that operate at fixed speeds, 10 Mbps or 100

Mbps, or auto-negotiating, 10/100 Mbps.

When connecting devices, consider the following:

❑

For dedicated 10Base-T connections, use Category 3, 4, or 5

Unshielded Twisted pair (UTP) cables with maximum length of

328 ft (100 m).

❑

For 10Base-T/100Base-TX or dedicated 100Base-TX

connections, use Category 5 UTP cables with maximum length

of 328 ft (100 m).

❑

For 100Base-FX fiber connections, use 50/125- or 62.5/

125-micron multimode fiber cables with maximum length of

1,351 ft (412 m) for half-duplex or 1.25 miles (2 km) for

full-duplex.

❑

Use straight-through cables to connect to workstations and

servers.

❑

Use crossover cables to connect to hubs, routers, and other

switches.

The switch is now operational. As needed, configure the ports, run

diagnostics or update software using a terminal as described in the

remaining topics in this chapter.

See Chapter 4 for examples of switch applications in a network

environment.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 67 68

Pas de commentaire

Allied-telesis AT-FS724 Manuel d'utilisateur Page 30