Allied-telesis AT-FS705LE Manuel d'utilisateur télécharger pdf (Page 28)

Installation

Note

For wall-mount installation, the screws,

plastic anchors, and any other material

necessary to physically mount the switch

to the wall are not provided.

Selecting a Site

Be sure to observe the following requirements

when choosing a site for your switch.

❑ Make sure you are placing the switch in a

dust-free and moisture-free environment.

❑ Do not block the ventilation openings on

the unit. Allow at least 10 centimeters (4

inches) of space at the front and back of

the unit for ventilation.

❑ Make sure that the switch’s power is

accessible and cables can be connected

easily.

❑ Cabling should be away from sources of

electrical noise such as radios,

transmitters, broadband amplifiers,

power lines, and fluorescent fixtures.

❑ Do not place objects on top of the switch.

❑ Use dedicated power circuits or power

conditioners to supply power to the

switch.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Pas de commentaire

Allied-telesis AT-FS705LE Manuel d'utilisateur Page 28