Allied Telesis Switch AT-SBXPWRSYS1 Manuel d'utilisateur télécharger pdf (Page 87)

SwitchBlade x3112 Installation Guide

2. Lift the AT-SBx3112 Chassis into the equipment rack and set the

bottom of the equipment rack brackets firmly on the two equipment

rack screws you installed in “Preparing the Equipment Rack” on

page 79.

Figure 40. Lifting the AT-SBx3112 Chassis into the Equipment Rack

3. With the bottom of the rack mount ears resting on the two rack mount

screws, tilt the top of the chassis back until both rackmount brackets

are flush and parallel with the vertical rack rails.

4. Install six rack mount screws (not provided) to secure the chassis to

the equipment rack, as shown in Figure 41 on page 88.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 221 222

Pas de commentaire

Allied Telesis Switch AT-SBXPWRSYS1 Manuel d'utilisateur Page 87