Allied Telesis AR450S Manuel d'utilisateur télécharger pdf (Page 47)

Switching on the AR440S, AR441S and AR450S SHOW VLAN DEBUG 3-47

Software Release 2.6.6

C613-03079-00 REV A

Examples To display information on the default VLAN, use the command:

SHOW VLAN=default

Related Commands CREATE VLAN

DESTROY VLAN

SHOW VLAN DEBUG

Syntax SHOW VLAN DEBUG

Description This command displays debug information for all VLANs (see Figure 3-15 on

page 3-47 and Table 3-21 on page 3-47).

Figure 3-15: Example output from the SHOW VLAN DEBUG command

Discrim The discriminator specified by the module to identify which

packets of the given format should be received.

MAC Address The Media Access Control source address for which the

module wishes to receive packets. This is commonly known

as the Ethernet address.

Table 3-20: Parameters displayed in the output of the SHOW VLAN

command (Continued).

Parameter Meaning

Vlan Enabled Debug Modes Output Timeout

------------------------------------------------------------

Vlan1 PKT 16 NONE

------------------------------------------------------------

Vlan Enabled Debug Modes Output Timeout

------------------------------------------------------------

Vlan4094 None

------------------------------------------------------------

Table 3-21: Parameters in the output of the SHOW VLAN DEBUG command.

Parameter Meaning

VLAN A string comprising the constant “Vlan” and the VLAN Identifier of

the VLAN.

Enabled Debug Modes The debugging option for the VLAN; one of “PKT” or “None”.

Output The output device for the VLAN; shown when a debug mode is

presently enabled.

Timeout The time in seconds that the debugging options for the VLAN are

enabled; shown when a debug mode is presently enabled. If a

timeout value is not set, “None” is shown.

1 2 ... 42 43 44 45 46 47 48

Pas de commentaire

Allied Telesis AR450S Manuel d'utilisateur Page 47