Allied Telesis AR450S Manuel d'utilisateur télécharger pdf (Page 34)

3-34 SET SWITCH QOS AR400 Series Router Software Reference

Software Release 2.6.6

C613-03079-00 REV A

transmitted promptly, do not assign priority 7 to a low-numbered egress

queue.

Example To set the mapping shown in Table 3-12 on page 3-34, use the command:

SET SWITCH QOS=0,0,0,1,1,2,2,3

Related Commands SHOW SWITCH QOS

Table 3-11: Default priority level to queue mapping for four QOS egress

queues .

Priority level Queue

Table 3-12: Example priority level to QOS egress queue mapping .

Priority level Queue

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Pas de commentaire

Allied Telesis AR450S Manuel d'utilisateur Page 34