Allied Telesis AR450S Manuel d'utilisateur télécharger pdf (Page 45)

Switching on the AR440S, AR441S and AR450S SHOW SWITCH QOS 3-45

Software Release 2.6.6

C613-03079-00 REV A

SHOW SWITCH QOS

Syntax SHOW SWITCH QOS

Description This command displays the current mapping of user priority level to QOS

egress queue for the switch ports (see Figure 3-13 on page 3-45 and Table 3-19

on page 3-45).

Packets that originate on the router, or are routed by the router’s software, have

been assigned a Quality of Service priority of 7. To ensure that these packets are

transmitted promptly do not assign priority 7 to a low-numbered egress queue.

Figure 3-13: Example output from the SHOW SWITCH QOS command

Example To display the current configuration of the priority level to QOS egress queue

mappings, use the command:

SHOW SWITCH QOS

Related Commands SET SWITCH QOS

Priority Level QOS egress queue

-------------------------------------

0 ................... 1

1 ................... 0

2 ................... 0

3 ................... 1

4 ................... 2

5 ................... 2

6 ................... 3

7 ................... 3

Table 3-19: Parameters displayed in the output of the SHOW SWITCH QOS

command.

Parameter Meaning

Priority level The priority level of the received frame.

QOS egress queue The Quality Of Service egress queue that frames with this

priority level join.

1 2 ... 40 41 42 43 44 45 46 47 48

Pas de commentaire

Allied Telesis AR450S Manuel d'utilisateur Page 45