Allied Telesis AR450S Guide d'installation

AR400 SERIES ROUTERQUICK INSTALL GUIDE

10 AR400 Series RouterC613-04032-01 REV E2. Connect to the DMZ (AR450S)If you have a public server, use an Ethernet patch cable to connect it to the A

Quick Install Guide 11C613-04032-01 REV EDocumentation and Tools CD-ROMThe Documentation and Tools CD-ROM bundled with each router contains the comple

AR400 Series Router Quick Install GuideDocument Number C613-04032-01 REV E.Copyright © 2003 Allied Telesyn International, Corp.19800 North Creek Parkw

Quick Install Guide 3C613-04032-01 REV EModels Covered By This GuideThis Quick Install Guide includes information on the following models: AR410 AR4

4 AR400 Series RouterC613-04032-01 REV ESelecting a SiteThe router can be installed in a standard 19-inch rack, or on a level surface such as a deskto

Quick Install Guide 5C613-04032-01 REV E• Screw the handles to the wider side of each bracket, using the supplied M3 screws (see Figure 1)• Screw the

6 AR400 Series RouterC613-04032-01 REV E• The power cable is securely plugged in• The power supply is operationalIf the LEDs light incorrectly, refer

Quick Install Guide 7C613-04032-01 REV EConfiguring the RouterAR400 Series routers can be configured via the Command Line Interface (CLI) or Graphical

8 AR400 Series RouterC613-04032-01 REV ESee the AR400 Series Router Software Reference for more information on router start-up and configuration proce

Quick Install Guide 9C613-04032-01 REV E3. Enable IP.At the CLI, enter the command:enable ip4. Assign an IP address to VLAN1.Assign the VLAN1 interfac