Allied Telesis AT-A15/LX Guide d'installation télécharger pdf (Page 51)

AT-8316F and AT-8324 Installation Guide

7. Set the Stack ID switch on the master switch to 1. Refer to Figure

3-7 for the location of the Stack ID switch.

8. Set the Stack ID switch on one slave switch to 2 and set the Stack

ID switch on the other slave switch to 3.

Note

Do not use a setting of 0 (zero) or 9. These settings are invalid.

9. Connect the data cables to the ports on the front of each switch.

10. Go to the procedure Powering On a Stack on page 3-57.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 91 92

Pas de commentaire

Allied Telesis AT-A15/LX Guide d'installation Page 51