Allied-telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT Manuel d'utilisateur télécharger pdf (Page 46)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

Note - The current firmware version is unable to retrieve the correct information for the

History Control Table. As a result, the following error message appears: "Failed to get MIB

data."

Alarm Table

Displays the RMON Alarm table.

Event Table

Displays the RMON Event table.

Event Log

Displays the RMON Event log.

Port Menu

From the Port menu, you can view and edit MIB information about the port.

Note - The current firmware version does not allow AT-View Plus Device Manager to support the

following features:

• Spanning Tree Info

• Class of Service

• IGMP Snooping

Utilization

Displays the port's utilization information.

Interface Info

Displays port statistics such as the number of frames received and transmitted on the port,

bytes received and transmitted on the port, and port status.

Note - The Port Type parameter returns '???(62)'.

Note - Valid MIB Set values for the Administration Status parameter are 'up' and 'down'.

Attempting to set this parameter to any other value will result in the error message: "The

error occurred with 'Set' operation. Error: gen Error."

Error Statistics

Displays error statistics.

Detail Info

Displays detailed port information such as duplex mode.

Note - The current firmware version accepts from 0 up to 19 characters for the Port Name

parameter.

PN 613-50507-00 Rev D Page 46 of 253

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 252 253

Pas de commentaire

Allied-telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT Manuel d'utilisateur Page 46