Allied-telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT Manuel d'utilisateur télécharger pdf (Page 172)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

Rapier 48i

Device Manager LEDs for Rapier 48 and 48i

LED State Description

PWR

Green

Red

The switch is receiving power from the main power supply.

Main power supply is either off or has failed.

RPS

Green The switch is receiving power from the redundant power supply.

Red

Gray

RPS has failed.

RPS is not installed or RPS monitoring is disabled.

DUPLEX

Green

Orange

The port is operating at full duplex.

The port is operating at half duplex.

Note - The current firmware version does not allow AT-View Plus Device Manager to support the

Reset button.

Note - Please refer to Uplink Modules for the operations and behavior of the uplink modules

installed in this device.

Note - To turn RPS monitoring on or off on the switch, from the switch command line interface

enter the command SET SYSTEM RPSMONITOR={ON|OFF}. To see whether RPS monitoring is

PN 613-50507-00 Rev D Page 172 of 253

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 252 253

Pas de commentaire

Allied-telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT Manuel d'utilisateur Page 172