Allied-telesis AT-S63 Manuel d'utilisateur télécharger pdf (Page 64)

100

101

Chapter 3: Basic Switch Commands

64 Section I: Basic Operations

SET SYSTEM

Syntax

set system [name="

name

"] [contact="

contact

[location="

location

Parameters

name Specifies the name of the switch. The name can be from 1 to

39 alphanumeric characters in length and must be enclosed

in double quotes (“ “). Spaces are allowed.

contact Specifies the name of the network administrator responsible

for managing the switch. The contact can be from 1 to 39

alphanumeric characters in length and must be enclosed in

double quotes. Spaces are allowed.

location Specifies the location of the switch. The location can be from

1 to 39 alphanumeric characters in length and must be

enclosed in double quotes. Spaces are allowed.

Description

This command sets a switch’s name, the name of the network

administrator responsible for managing the unit, and the location of the

unit.

If a parameter already has a value, the new value replaces the existing

value. To view the current values for these parameters, refer to “SHOW

SYSTEM” on page 79. To delete a value without assigning a new value,

refer to “RESET SYSTEM” on page 53.

Note

If you define the system name before you set up a system prompt,

the switch uses the first 16 characters of the system name as the

prompt. See “SET PROMPT” on page 38.

Examples

The following command sets a switch’s information:

set system name="Sales" contact="Jane Smith" location="Bldg

3, rm 212"

The following command sets just the system’s name:

set system name="PR Office"

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 679 680

Commentaires sur ces manuels

Pas de commentaire

Allied-telesis AT-S63 Manuel d'utilisateur Page 64

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Allied-telesis AT-S63