Allied-telesis AT-S60 Manuel d'utilisateur télécharger pdf (Page 105)

AT-S60 Command Line User’s Guide

103

The following command sets the security level to Secure for Ports 1

through 4 on the line card in Slot 9 and the intrusion action to disable

the ports:

set switch port=9.1-4 securitymode=secure

intrusionaction=disable participate=yes

The Participate option is required in the above command to activate the

disable intrusion action.

The following command sets the security level for Port 8 on the line card

in Slot 4 to the Limited mode, specifies a limit of 5 dynamic MAC

addresses, and sets the intrusion action to send a trap:

set switch port=4.8 securitymode=limited learn=5

intrusionaction=trap participate=yes

The following command changes the maximum number of learned MAC

addresses to 200 on Ports 4 and 6 on the line card in Slot 12. The

command assumes that the ports have already be set to the Limited

security mode:

set switch port=12.4,6 learn=200

The following command returns Ports 1 to 4 on the line card in Slot 11 to

the automatic security level, which, in effect, disables port security:

set switch port=11.1-4 securitymode=automatic

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 302 303

Pas de commentaire

Allied-telesis AT-S60 Manuel d'utilisateur Page 105