Allied-telesis AT-IFS802SP Manuel d'utilisateur télécharger pdf (Page 54)

50 AT-IFS802SP-80 User Manual

6.18VLANconguration

A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain, which would

allow you to isolate network trafc, so only the members of the sameVLAN will receive trafc

from the ones of the same VLAN. Basically, creating a VLAN on a switch is logically equivalent of

reconnecting a group of network devices to another Layer 2 switch. However, all the network devices

are still plugged into the same switch physically.

This switch supports Port-based and 802.1Q(tagged-based)VLAN.Thedefault congurationof

VLAN operation mode is “Disable”.

VLANCongurationinterface

A port-based VLAN basically consists of its members—ports, which means the VLAN is created

bygroupingtheselectedports.Thismethodprovidestheconvenienceforuserstocongure

a simple VLAN easily without complicated steps. Packets can go among only members of the

same VLAN group. Note all unselected ports are treated as belonging to another single VLAN.

If the port-based VLAN enabled, the VLAN-tagging is ignored. The port-based VLAN function

allowstheusertocreateseparateVLANstolimittheunnecessarypacketooding;however,for

the purpose of sharing resource, a single port called a common port can belongs to different

VLANs, which all the member devices (ports) in different VLANs have the permission to access

the common port while they still cannot communicate with each other in different VLANs.

6.18.1 Port-based VLAN

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 100 101

Pas de commentaire

Allied-telesis AT-IFS802SP Manuel d'utilisateur Page 54