Allied-telesis AT-IFS802SP Manuel d'utilisateur télécharger pdf (Page 28)

24 AT-IFS802SP-80 User Manual

5.3 Login in the Console Interface

When the connection between Switch and PC is ready, turn on the PC and run a terminal emulation

program or HyperTerminal and congure its communication parameters to match the following

default characteristics of the console port:

Baud Rate: 9600 bps

Data Bits: 8

Parity: none

Stop Bit: 1

Flow control: None

Havingnishedtheparametersettings,click‘OK’.Whentheblankscreenshowsup,pressEnterkey

tohavethe loginpromptappears.Keyin‘manager’(defaultvalue) forUser nameand“friend”for

Password (use Enter key to switch), then press Enter and the Main Menu of console management

appears..

5.4 CLI Management

The system supports the console management—CLI command. After you log in on to the system, you

will see a command prompt. To enter CLI management interface, type in “enable” command.

The following table lists the CLI commands and description.

CLI command interface

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 100 101

Pas de commentaire

Allied-telesis AT-IFS802SP Manuel d'utilisateur Page 28