Allied-telesis AT-IFS802SP Manuel d'utilisateur télécharger pdf (Page 53)

49AT-IFS802SP-80 User Manual

6.17 Rate Limiting

Youcansetupeveryport’sbandwidthrateandframelimitationtype.

Ingress Limit Frame type• :selecttheframetypethatwantstolter.Therearefourframetypes

for selecting:

All

Broadcast/Multicast/Flooded Unicast

Broadcast/Multicast

Broadcast only

Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Broadcast only types

are only for ingress frames. The egress rate only supports All type.

Rate Limiting interface

All the ports support port ingress and egress rate control. For example, assume port 1 is 10Mbps, •

users can set it’s effective egress rate is 1Mbps, ingress rate is 500Kbps. The switch performs the

ingressratebypacketcountertomeetthespeciedrate

Ingress: Enter the port effective ingress rate (The default value is “0”).

Egress: Enter the port effective egress rate (The default value is “0”).

And then, click to apply the settings•

A p p l y

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 100 101

Pas de commentaire

Allied-telesis AT-IFS802SP Manuel d'utilisateur Page 53