Allied-telesis AT-IFS802SP Manuel d'utilisateur télécharger pdf (Page 49)

45AT-IFS802SP-80 User Manual

Assigning 2 ports to a trunk group with LACP disabled

Static Trunking Group information

LACP enabled•

Having set up the aggregator setting with LACP enabled, you will see the trunking group

information between two switches on the tab of Aggregator Information.

Switch1conguration

Set 1. System Priority of the trunk group. The default is 1.

Select a 2. trunk group ID by pull down the drop-down menu bar.

Enable LACP.3.

Include the member ports by clicking the 4. Add button after selecting the port number and

thecolumneldofWork Ports changes automatically.

Switch1congurationinterface

Aggregation Information of Switch 1

5. Click on the tab of Aggregator Information to check the trunked group information as

theillustrationshownaboveafterthetwoswitchescongured.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 100 101

Pas de commentaire

Allied-telesis AT-IFS802SP Manuel d'utilisateur Page 49