Allied-telesis AT-SBx81CFC960 Manuel d'utilisateur Page 155

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 322
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 154
SwitchBlade x8106 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section II: Installing the Chassis 155
6. Connect the fiber optic cable to the port on the transceiver, as shown
in Figure 96. The connector should snap into the port.
Figure 96. Attaching a Fiber Optic Cable to an SFP+ Transceiver in the
AT-SBx81XS6 Line Card
7. Repeat this procedure to install additional SFP plus transceivers in the
AT-SBx81XS6 Line Cards.
After installing and cabling the SFP+ transceivers, do one of the following:
To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
After cabling all the ports in the chassis, go to Chapter 9,
“Powering On the Chassis” on page 171.
Vue de la page 154
1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 321 322

Commentaires sur ces manuels

Pas de commentaire