Allied-telesis AT-SBx81CFC960 Manuel d'utilisateur Page 152

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 322
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 151
Chapter 8: Installing the Transceivers and Cabling the Ports
152 Section II: Installing the Chassis
Installing SFP+ Transceivers in the AT-SBx81XS6 Line Card
Please review the information in “Guidelines to Installing SFP and SFP+
Transceivers” on page 147 before performing this procedure.
To install 10 Gbps SFP+ transceivers in the AT-SBx81XS6 Line Card,
perform the following procedure:
1. Remove the dust plug from the slot chosen for an SFP+ transceiver.
Figure 91 shows the dust plug removed from slot 1.
Figure 91. Removing the Dust Cover from an SFP+ Slot in the AT-
SBx81XS6 Line Card
Note
Do not remove the dust plug from the SFP+ slot if you are not
installing the transceiver at this time. The dust plug protects the line
card from dust contamination.
2. Orient the SFP+ transceiver with the handle on top, as shown in Figure
92 on page 153.
Vue de la page 151
1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 321 322

Commentaires sur ces manuels

Pas de commentaire