Allied-telesis AT-S97 Manuel d'utilisateur télécharger pdf (Page 63)

AT-S85 and AT-S97 Management Software User’s Guide

SYSTEM SET CONTACT

Syntax

system set contact=

contact

Parameter

contact Specifies the name of the network administrator who has

the responsibility of maintaining the chassis. The contact

can be up to 25 alphanumeric characters. Spaces are

allowed, but names with spaces must be enclosed in

double quotes (“ “). To remove the current value without

specifying a new value, enter “none.”

Privilege Levels

Administrator and read-write.

Description

This command is used to set the name of the network administrator who is

responsible for managing the chassis. To view this parameter’s current

value, refer to “SYSTEM SHOW INFO” on page 69.

Example

This command sets the chassis’ contact to “Jane Smith:”

system set contact="Jane Smith"

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 247 248

Pas de commentaire

Allied-telesis AT-S97 Manuel d'utilisateur Page 63