Allied-telesis AT-S97 Manuel d'utilisateur télécharger pdf (Page 112)

Chapter 5: Port and Module Commands

112

Description

This command is used to display status information about the media

converter, power supply, fan, and management modules in a chassis. The

information varies depending on the module. Figure 17 is an example of

the information for the AT-MCF2000AC Power Supply Module or the

AT-MCF2KFAN Fan Module.

Figure 17. SYSTEM SHOW MODULE Command for a Power Supply or

Fan Module

The acronym “RPS” for “Redundant Power Supply” in the top line should

be ignored. It is a misnomer for a fan module as well as for a power supply

module in a chassis with one power supply. The letter following “RPS” is

the chassis slot location of the power supply or fan module.

Figure 18 illustrates the information for the management module.

RPSA Information:

Module Name ................

Module Type ................ AT-MCF2000AC

Power OK ................... Yes

Module Present ............. Present

3.3V ....................... Good = 3.415V

12.0V ...................... Good = 12.125V

Temperature ................ 25.821 C

Temperature Threshold ...... 60 C

Fan A Speed ................ 7105 RPM

Fan B Speed ................ 7033 RPM

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 247 248

Pas de commentaire

Allied-telesis AT-S97 Manuel d'utilisateur Page 112