Allied-telesis AT-S97 Manuel d'utilisateur télécharger pdf (Page 110)

Chapter 5: Port and Module Commands

110

To configure the channels and ports of a media converter module, refer to

“SYSTEM SET INTERFACE” on page 81 and “SYSTEM SET PORT” on

page 92.

Examples

This command displays a list of the media converter modules in a chassis

with the ID number 0:

system show interface id=0

This command displays the status of all the channel ports on a media

converter module in slot 2 of a chassis with the ID number 1:

system show interface id=1/2

This command displays the parameter settings for the two ports of

channel 11 of a media converter module in slot 1 of a chassis with the ID

number 1:

system show interface id=1/1/11

Maximum Frame Size Displays the maximum frame size of a port. This value cannot

be changed and is the same for all of the ports on a module.

The maximum frame sizes are 1632 bytes for the

AT-MCF2012LC and AT-MCF2012LC/1 Media Converter

Modules and 10240 bytes for the AT-MCF2032SP Media

Converter Module.

Table 12. SYSTEM SHOW INTERFACE Command - Chassis ID, Slot Number and Channel

Number

Parameter Description

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 247 248

Pas de commentaire

Allied-telesis AT-S97 Manuel d'utilisateur Page 110