Allied-telesis AT-MCF2000M Manuel d'utilisateur télécharger pdf (Page 49)

AT-MCF2000M Management Module Installation Guide

3. Align the edges of the module with the guides in the

slot and carefully slide the module into the chassis until

it is flush with the front of the chassis. Refer to Figure

15. Light pressure may be necessary to firmly seat the

module connector on the connector on the back panel

of the chassis.

Caution

Do not force the module into place. Doing so may

damage the connector pins on the backplane of the

chassis. If there is resistance, remove the module and

reinsert it after verifying that the edges of the card are

properly aligned in the guides in the chassis’ module

slot.

Figure 15. Installing the Management Module

AT-MCF2KFA

NORMA

FAULT

STA

-M

F2000M

-2

CTIVITY

1200a

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 69 70

Pas de commentaire

Allied-telesis AT-MCF2000M Manuel d'utilisateur Page 49