Allied-telesis AT-MCF2000M Manuel d'utilisateur télécharger pdf (Page 65)

AT-MCF2000M Management Module Installation Guide

Problem 5: A twisted pair cable is connected to the Stack

port on the management module, but the port’s Link/Activity

LED is off.

Solutions: Try the following:

 Verify the next chassis in the stack is powered on and

operating properly.

 Verify the twisted pair cable is securely connected to the

Stack port on the management module and to the Stack

port in the next chassis.

 Verify you are using the correct type of cable for the port

and have not exceeded the maximum length. For cable

specifications, refer to “Cable Requirements” on

page 42.

Note

If you need further assistance, please contact Allied

Telesis Technical Support. Refer to “Contacting Allied

Telesis” on page 14.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70

Pas de commentaire

Allied-telesis AT-MCF2000M Manuel d'utilisateur Page 65