Allied-telesis AT-GS924M Manuel d'utilisateur télécharger pdf (Page 39)

AT-GS908M, AT-GS916M, and AT-GS924M Switches Installation Guide

Installing the Power Cord Retaining Clip

Perform the following procedure to install the power cord retaining clip on

the AT-GS900M switch:

1. Locate the power cord retaining clip, as shown in Figure 8.

Figure 8. Power Cord Retaining Clip

2. Install the clip on the AC power connector on the back panel of the

switch. With the “u” of the clip facing down, press the sides of the clip

toward the center and insert the short ends into the holes in the

retaining bracket, as shown in Figure 9.

Figure 9. Inserting the Retaining Clip into the Retaining Bracket

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 53 54

Pas de commentaire

Allied-telesis AT-GS924M Manuel d'utilisateur Page 39