Allied-telesis AT-GS924M Manuel d'utilisateur télécharger pdf (Page 16)

Chapter 1: Overview

Features

Here are the hardware features of the AT-GS900M Series Gigabit

Ethernet Switches.

Twisted-Pair

Ports

Here are the basic features of the 10/100/1000 Mbps twisted-pair ports:

 8, 16, or 24 ports per switch

 10Base-TX, 100Base-T and 1000Base-T compliant

 IEEE 802.3u Auto-Negotiation compliant

 Auto-MDI/MDIX

 100 meters (328 feet) maximum operating distance

 IEEE 802.3x Flow Control in 10/100Base-TX full-duplex operation

 IEEE 802.3x Back Pressure in 10/100Base-TX half-duplex

operation

 IEEE803.3z 1000Base-T Flow Control

 RJ-45 connectors

SFP Slots All three switches support both 100Base-FX and 1000Base-SX/LX

transceivers. The switches support slots for SFPs as follows:

 One SFP slot on the AT-GS908M switch

 Two SFP slots on the AT-GS916M switch

 Four SFP slots on the AT-GS924M switch

Note

The AT-GS916M and AT-GS924M SFP slots are paired with

twisted-pair ports on the switch to form combo ports. For more

information, see “Combo Ports” on page 22.

Note

You must purchase SFP transceivers separately. For a list of

supported transceivers, contact your Allied Telesis distributor or

reseller.

Note

See the product data sheets for the specific ATI SFP modules

supported by the AT-GS900M Series switches.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

Pas de commentaire

Allied-telesis AT-GS924M Manuel d'utilisateur Page 16