Allied Telesis AT-S94 Guide de l'utilisateur télécharger pdf (Page 239)

Downloading Software with the CLI

Downloading Software

Page 239

To check the configuration, enter the command “show ip interface” as illustrated in the following example.

User Name

A user name is used to manage the device remotely, for example through SSH, Telnet, or the Web interface. To

gain complete administrative (super-user) control over the device, the highest privilege (15) must be specified.

Note

Only an administrator (super-user) with the highest privilege level (15) is allowed to manage the device

through the Web browser interface.

For more information about the privilege level, see the CLI Reference Guide.

The configured user name is entered as a login name for remote management sessions. To configure user name

and privilege level, enter the command at the system prompt as shown in the configuration example:

Downloading Software

For this explanation, the following parameters are going to be used:

• TFTP Server — 172.16.101.101

• System software file — file1

• Boot file — file 2

Standalone Device Software Download

To download software an a standalone device perform the following:

1. Power up the device as described in the Allied Telesis AT-S945 Installation Guide. The CLI command prompt

is displayed.

Console#

show ip interface

Proxy ARP is disabled

IP Address I/F Type Broadcast

Directed

------------ ------ ------ ---------

100.101.101.101/24 vlan 1 static disable

Console>

enable

Console#

configure

Console(config)#

username admin password

lee

privilege

Console#

1 2 ... 234 235 236 237 238 239 240 241 242 243 244 ... 253 254

Pas de commentaire

Allied Telesis AT-S94 Guide de l'utilisateur Page 239