Allied Telesis AT-S94 Guide de l'utilisateur télécharger pdf (Page 110)

Page 110

Allied Telesis

AT-S94 Management Software Web Browser Interface User’s Guide

• Current Status — Indicates whether the trunk is currently operational or non-operational. The possible field

values are:

– Up — Indicates the trunk is currently operating.

– Down — Indicates the trunk is currently not operating.

• Reactivate Suspended — Reactivates suspended trunks. The possible field values are:

– Checked — Reactivates the selected suspended trunk.

– Unchecked — Maintains the trunk status. This is the default value.

• Operational Status — Indicates the trunk operational status. Possible field values are:

– Suspended — The trunk is currently active, and is not receiving or transmitting traffic.

– Active — Indicates the trunk is currently active and is receiving and transmitting traffic.

– Disable — Indicates the trunk is currently disabled, and is not receiving or transmitting traffic.

• Admin Auto Negotiation — Displays the auto negotiation status of the trunk. Auto negotiation is a protocol

between two link partners that enables a port to advertise its transmission rate and flow control abilities to its

partner.

• Current Auto Negotiation — Displays the current Auto Negotiation setting.

• Admin Advertisement — Defines the auto negotiation setting the trunk advertises. The possible field values

are:

– Max Capability — Indicates trunk speeds.

– 10 Full — Indicates that the trunk advertises for a 10 Mbps speed trunk.

– 100 Full — Indicates that the trunk advertises for a 100 Mbps speed trunk.

– 1000 Full — Indicates that the trunk advertises for a 1000 Mbps speed trunk.

• Current Advertisement — Indicates the trunk advertises its speed to its neighbor trunk to start the

negotiation process. The possible field values are those specified in the Admin Advertisement field.

• Neighbor Advertisement — Indicates the neighboring trunk’s advertisement settings. The field values are

identical to the Admin Advertisement field values.

• Admin Speed — Indicates the configured rate for the trunk. The trunk type determines the speed settings

available. Trunk speeds can only be configured when auto-negotiation is disabled. The possible field values

are:

– 10M — Indicates the trunk is currently operating at 10 Mbps.

– 100M — Indicates the trunk is currently operating at 100 Mbps.

– 1000M — Indicates the trunk is currently operating at 1000 Mbps.

• Current Speed — Displays the configured rate for the trunk.

• Admin Flow Control — Displays the flow control status on the trunk.

– Enable — Indicates that flow control is currently enabled for the selected trunk.

– Disable — Indicates that flow control is currently disabled for the selected trunk. This is the default value.

• Current Flow Control — Displays the current Flow Control setting.

• LACP — Indicates if LACP is enabled on the trunk. The possible values are:

– Enabled — LACP is enabled on the trunk.

– Disabled — LACP is disabled on the trunk.

• PVE — Enables a port to be a Private VLAN Edge (PVE) port. When a port is defined as PVE, it bypasses the

Forwarding Database (FDB), and forwards all Unicast, Multicast and Broadcast traffic to an uplink (except

MAC-to-me packets). Traffic from the uplink is distributed to all interfaces.

3. Modify the fields.

4. Click Apply. The Trunk settings are saved and the device is updated.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 253 254

Commentaires sur ces manuels

Pas de commentaire

Allied Telesis AT-S94 Guide de l'utilisateur Page 110

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Allied Telesis AT-S94