Allied Telesis Patch 86261-04 Manuel d'utilisateur télécharger pdf (Page 3)

Patch 86261-09 For Rapier and AT-8800 Series Switches 3

Patch 86261-09 for Software Release 2.6.1

C613-10388-00 REV J

A Layer 3 filter configured to trap packets with the RouterAlert option did

not always filter MLD packets. This was due to variations in the MLD

packet fields. This issue has been resolved.

MLD Snooping did not read an MLD report as a correct MLD packet format

when PADN was placed before the Router Alert option. This issue has been

resolved.

Occasionally a fatal error occurred if users were changed with the login

command, and a TACACS+ server authenticated the users. This issue has

been resolved.

A static IGMP entry was not created with the create ip igmp destination

command from a configuration script or after enabling PIM for that

interface. A PIM Join was also not created. This issue has been resolved.

Now a PIM Join is sent to the RP following the PIM RP election process.

It was possible to create two identical 6-to-4 tunnels with the same IPv4

destination. This issue has been resolved.

BGP routes were not always readvertised to peers after a next-hop route

was lost and then reactivated. This issue has been resolved.

Occasionally the device suffered a fatal error if it received a large number of

directed broadcast packets. This issue has been resolved.

Existing options for DHCP policies could not be removed with the delete

dhcp command. This issue has been resolved.

An incorrect nexthop for a RIP route was advertised in RIP messages. This

issue has been resolved.

When a second device logged in, the CLI command prompt was sometimes

not displayed until the user pressed a key. This issue has been resolved so

that the prompt is displayed immediately.

When the most recently added VLAN was deleted, the switch did not

respond correctly to subsequent DHCP Discover messages. This issue has

been resolved.

PCR: 40236 Module: SWI Level: 2

PCR: 40258 Module: SWMX Level: 3

PCR: 40263 Module: TACPLUS, USER Level: 2

PCR: 40271 Module: IGMP, PIM Level: 2

PCR: 40275 Module: IPV6 Level: 2

PCR: 40277 Module: IPG Level: 2

PCR: 40279 Module: IPG Level: 2

PCR: 40285 Module: DHCP Level: 3

PCR: 40290 Module: IPG Level: 3

PCR: 40298 Module: TTY Level: 2

PCR: 40299 Module: IPG Level: 2

Allied Telesis Patch 86261-04 Manuel d'utilisateur Page 3