Allied Telesis Patch 86261-04 Manuel d'utilisateur télécharger pdf (Page 21)

Patch 86261-09 For Rapier and AT-8800 Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 21

Patch 86261-09 for Software Release 2.6.1

C613-10388-00 REV J

• All PIM routers: 224.0.0.13

• All CBT routers: 224.0.0.15

If IP is specified, addresses that are treated as router multicast addresses are

specified with the ADD/DELETE IGMPSNOOPING ROUTERADDRESS

command. In this mode, the switch will retain previous addresses that have

already been specified.

If MULTICAST is specified, the following addresses are treated as router

multicast addresses:

• DVMRP Routers: 224.0.0.4

• All PIM routers: 224.0.0.13

If NONE is specified, no router ports are created.

DELETE IGMPSNOOPING ROUTERADDRESS

Syntax DELETE IGMPSNOOPING ROUTERADDRESS=ipaddr[,...]

where

• ipaddr is a reserved IP multicast address in dotted decimal notation.

Description This command deletes reserved IP multicast addresses from the list of router

multicast addresses. The IP address specified must be within the range

224.0.0.1 to 224.0.0.255. This command is only valid if the IGMP snooping

router mode is set to IP with the SET IGMPSNOOPING ROUTERMODE

command.

SHOW IGMPSNOOPING ROUTERADDRESS

Syntax SHOW IGMPSNOOPING ROUTERADDRESS

Description This command displays information about the list of configured IP multicast

router addresses currently configured on the switch (Figure 2).

Figure 2: Example output for SHOW IGMPSNOOPING ROUTERADDRESS

IGMP Snooping Router Address

----------------------------------------------------------------------------

IGMP Snooping Router Mode ...... IP

Router Address List

--------------------------------

224.0.0.4

224.0.0.6

224.0.0.80

224.0.0.43

224.0.0.23

224.0.0.15

224.0.0.60

----------------------------------------------------------------------------

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Pas de commentaire

Allied Telesis Patch 86261-04 Manuel d'utilisateur Page 21