Allied-telesis IE200 Series Manuel d'utilisateur télécharger pdf (Page 34)

Chapter 1: Overview

AT-IE200 Series Installation Guide 34

Figure 8: SFP Link/Activity LEDs.

Table 7 describes the Link/Activity LEDs for the SFP slots.

Table 7: SFP Link/Activity LED Descriptions

LED Status Description

Off The slot is empty, the SFP transceiver

has not established a link to a network

device, or the LEDs are turned off. To turn on

the LEDs, use the NO ECOFRIENDLY LED

command.

Solid green The SFP has established a link to a network

device at 1 Gbps, but is not transmitting or

receiving network packets.

Flashing green The SFP transceiver is transmitting or receiving

network packets at 1 Gbps.

Solid amber The SFP has established a link to a network

device at 100 Mbps, but is not transmitting or

receiving network packets.

Flashing amber The SFP transceiver is transmitting or receiving

network packets at 100 Mbps.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 69 70

Pas de commentaire

Allied-telesis IE200 Series Manuel d'utilisateur Page 34