Allied-telesis AT-VIEW PLUS 3.2 VLAN MANAGER Manuel d'utilisateur télécharger pdf (Page 35)

Allied Telesyn AT-VIEW PLUS

VLAN MANAGER

6.3 AT-8200XL Series

Topics:

• VLAN Information Window

• Add/Modify VLAN Dialogs

6.3.1 VLAN Information Window

The VLAN Information Window displays the following attributes for each VLAN definition:

Column Name Description

Name This is the name of the VLAN.

Identifier This is the unique identifier of the VLAN.

Member Ports This is a list of the member ports of the VLAN.

Untagged Ports

This is a list of the untagged (port-based) member ports of the

VLAN.

Status

This indicates the status of the VLAN.

• idle

• operational

• under-construction

• not-operational

Note - An error message, "An error occurred during the operation. Error: Bad Value." will be

displayed when the user tries to modify the Default VLAN.

Note - An error message, "An error occurred during the operation. Error: The device is in

Multiple VLAN mode. Pre-configured VLANs cannot be displayed for this device." will be

displayed when the VLAN Mode is set to Multiple VLAN and the VLAN definitions for the

multiple VLANs were not displayed in the VLAN Information Window.

Note - After an Import VLAN operation of Multiple VLANs, all VLANs with valid VLAN

definitions will have a successful status except for the Default VLAN.

Note - After an Import VLAN operation, VLAN definitions with out of range Member Ports will

have a successful status.

Note - If the selected Uplink Port is not connected to the Uplink VLAN, and the VLAN Mode is

set to Multiple VLAN or 802.1Q Multiple VLAN, the connection with the device will be lost.

Furthermore, no warning message will be displayed before the connection is lost.

PN 613-50666-00 Rev C Page 35 of 59

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 58 59

Pas de commentaire

Allied-telesis AT-VIEW PLUS 3.2 VLAN MANAGER Manuel d'utilisateur Page 35