Allied-telesis AT-VIEW PLUS 3.2 VLAN MANAGER Manuel d'utilisateur télécharger pdf (Page 17)

Allied Telesyn AT-VIEW PLUS

VLAN MANAGER

SNMP Version

This drop down list allows you to select the SNMP version to use in managing the target

device.

Note - Before choosing "v2c" or "v3", make sure that the target device you are connecting

to supports SNMP v2c and/or SNMP v3 respectively.

Settings

If the Version is set to "v1" or "v2c", this button opens the SNMP v1/v2c Settings

window. Otherwise, if the Version is set to "v3", this button opens the SNMP v3 Settings

window.

SNMP v1/v2c Settings dialog box

Community Name

The community strings to use in performing SNMP operations on the target host. There

are two types of community strings for SNMP. Be sure to specify strings which match the

ones configured on the target host.

By default, the following strings are used:

for the 'Get' operation

public

for the 'Set' operation

private

PN 613-50666-00 Rev C Page 17 of 59

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 58 59

Pas de commentaire

Allied-telesis AT-VIEW PLUS 3.2 VLAN MANAGER Manuel d'utilisateur Page 17