Allied-telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT Manuel d'utilisateur télécharger pdf (Page 14)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

Port selection dialog box

When you select a menu item acting on ports, a dialog box opens to let you select ports. Check

the target ports and click OK.

Note - If you select multiple ports, it may take some time for data to be displayed.

Select Port dialog box

Port status colors

Port status is shown by its color. Port speed is also displayed in the port image.

• Link Up: Green

• Disabled: Red (the port is disabled by an administrator)

• Partitioned/Blocking: Yellow

• Others: Default colour (usually black)

Note - SNMPv3: Depending on the READ VIEW access settings of the User Account Name

used, there is a possibility that AT-View Plus Device Manager may not be able to access some

MIB values that control the Port status. When this happens, the affected ports will be shown in

the default color.

LED status

In AT-View Plus Device Manager, LEDs do not blink. The meanings of LEDs differ between

devices.

PN 613-50665-00 Rev C Page 14 of 294

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 293 294

Pas de commentaire

Allied-telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT Manuel d'utilisateur Page 14