Allied-telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT Manuel d'utilisateur télécharger pdf (Page 134)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

Note – To turn RPS monitoring on or off on the router, from the AT-AR740 console enter the

command SET SYSTEM RPSMONITOR={ON|OFF}. To see whether RPS monitoring is on,

use the command SHOW SYSTEM. To turn on RPS monitoring using SNMP, set the

fanAndPsRpsMonitoringStatus variable to on.

Note – The current firmware version does not allow AT-View Plus Device Manager to support

the RPS LED on the AT-AR740-DC model.

Agent Menu

From the Agent menu, you can view and edit the system information for the router, or log into

the CLI using Telnet.

System Info

Displays basic system information, including system name, location, contact and

description.

Power Supply Info

Displays information about the power supply, redundant power supply and power supply

monitoring.

File List

Displays a list of the files in the router’s flash file system.

Config File Name

Displays the file name of the start-up configuration file.

Telnet

Starts a Telnet connection to the router.

WEB browser

Opens your web browser and connects to the switch’s HTTP server.

Note – The web browser can only contact the device if the device has a valid resource file

loaded and set, and the HTTP server and GUI on the device are enabled.

Routing Menu

From the Routing menu, you can view and edit information about the router’s IP routing

functions.

ARP Table

Displays the mapping of IP addresses to MAC addresses (the ARP cache) on the router.

Address Table

Displays the list of IP interfaces and their IP addresses on the router.

PN 613-50665-00 Rev C Page 134 of 294

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 293 294

Pas de commentaire

Allied-telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT Manuel d'utilisateur Page 134