Allied-telesis AT-S97 Manuel d'utilisateur télécharger pdf (Page 159)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide

159

Description

This command creates a new master configuration file with the current

parameter settings of the modules in the chassis. The file is stored in the

file system on the management module. For background information, refer

to “Overview” on page 142.

If, after creating a new master configuration file, you want to designate it

as the active file on the management module, perform the CONFIG SET

command. For instructions, refer to “CONFIG SET” on page 160.

Example

This command creates the new master configuration file “mcf pat

traffic.cfg” with the current settings of all the modules in the chassis or

stack. The chassis with the management module has an ID of 0:

config save filesystem=system://0/m/"mcf pat traffic.cfg"

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 253 254

Pas de commentaire

Allied-telesis AT-S97 Manuel d'utilisateur Page 159