Allied-telesis AT-S95 CLI Manuel d'utilisateur télécharger pdf (Page 117)

100

101

Ethernet Configuration Commands

Page 117

User Guidelines

Use the port storm-control broadcast enable Interface Configuration mode command to enable Broadcast

storm control.

The software displays the actual rate since granularity depends on the requested rate.

Example

The following example configures the maximum storm control Broadcast rate at 900 Kbits/Sec.

show ports storm-control

The show ports storm-control User/Privileged EXEC mode command displays the storm control configuration.

show ports storm-control [interface]

Parameters

•

interface — A valid Ethernet port. (Full syntax: unit/port)

Default Configuration

This command has no default configuration.

Command Modes

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example displays the storm control configuration.

console(config)#

interface ethernet

1/e5

console(config-if)#

port storm-control broadcast rate

900

console#

show ports storm-control

Port State Rate [Kbits/Sec] Included

---- -------- ---------------- --------------------------------------

1/e1 Enabled 70 Broadcast, Multicast

1/e2 Enabled 100 Broadcast

1/e3 Disabled 100 Broadcast

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 391 392

Commentaires sur ces manuels

Pas de commentaire

Allied-telesis AT-S95 CLI Manuel d'utilisateur Page 117

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Allied-telesis AT-S95 CLI