Allied-telesis AT-S95 CLI (AT-8000GS Series) Manuel d'utilisateur télécharger pdf (Page 328)

100

101

Page 328

Allied Telesis

AT-8000GS Command Line Interface User’s Guide

show sessions

The show sessions User EXEC mode command lists open Telnet sessions.

Syntax

show sessions

Parameters

This command has no arguments or keywords.

Default Configuration

There is no default configuration for this command.

Command Mode

User EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example lists open Telnet sessions.

The following table describes significant fields shown above.

show system

The show system User EXEC mode command displays system information.

Syntax

show system [unit unit]

console>

show sessions

Connection Host Address Port Byte

---------- ------------- ---------- ----- ----

1 Remote device 172.16.1.1 23 89

2 172.16.1.2 172.16.1.2 23 8

Field Description

Connection Connection number.

Host Remote host to which the device is connected through a Telnet session.

Address IP address of the remote host.

Port Telnet TCP port number

Byte Number of unread bytes for the user to see on the connection.

1 2 ... 323 324 325 326 327 328 329 330 331 332 333 ... 396 397

Commentaires sur ces manuels

Pas de commentaire

Allied-telesis AT-S95 CLI (AT-8000GS Series) Manuel d'utilisateur Page 328

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Allied-telesis AT-S95 CLI (AT-8000GS Series)